Base System Hardware Price (per unit):
$34,900
Development, installation, and commissioning are not included in base price.
Full professional service and permitting are available for an additional fee (see below).
Full professional service and permitting are available for an additional fee (see below).
Note:
- Base price covers system hardware only: flywheel, battery, inverter/controller, safety enclosure, and internal sensors.
- Professional installation, site prep, commissioning, and permitting are required and quoted separately.
- Typical full installed system (turn-key, with site labor and commissioning): $42,000 – $49,000 depending on location and local requirements.
- All pricing ensures full coverage of R&D, engineering, and business margin—no discounts or hidden costs.
System Overview
Why Hybrid?
Our system stores energy two ways: as rotational energy in a high-speed flywheel (for surge and backup), and as chemical energy in advanced lithium batteries (for long-term use).
Result: All the reliable power you need, ready to cover daily use, grid outages, and big startup loads—no single point of failure.
- Backup & grid smoothing
- Handles AC, pumps, and high-surge appliances
- Lower bills with peak-shaving
| Feature | Value |
|---|---|
| Daily Home Energy | 24 kWh (2-bedroom home) |
| Battery Storage | 16 kWh (48V, 350Ah LFP) |
| Flywheel Storage | 8 kWh (1.2m steel barrel) |
| System Footprint | 2.0m × 2.0m room |
| Installation | Indoor, garage or shed |
Main Advantages
⚡️
Rapid Surge Response
Flywheel instantly covers high startup loads (motors, AC, pumps).
🔋
Long Duration Backup
Lithium battery runs your home overnight or for hours during outages.
🔒
Ultimate Resilience
With two storage systems, you're protected from battery or grid faults.
Enhance Your Power Solution
Upgrade to composite flywheels, add extra battery packs, or scale system output to 50 kWh+ for estates, commercial, or microgrid use.
Contact us for custom high-capacity, three-phase, or remote-ready builds!
Upgrade to composite flywheels, add extra battery packs, or scale system output to 50 kWh+ for estates, commercial, or microgrid use.
Contact us for custom high-capacity, three-phase, or remote-ready builds!
See it in Your Home
Premium Home Energy Storage: Blue = Flywheel Silver = Battery Orange = Inverter/Controls
Sleek, safe, and beautifully installed in any modern garage.
Sleek, safe, and beautifully installed in any modern garage.
Key System Components
| Component | Description | Main Role | Retail Value (USD) |
|---|---|---|---|
| Flywheel Barrel | Steel/composite, 1.2m diameter, 0.3m thick, 1.3 tons | Stores rapid-response energy for surges | $14,900 |
| Battery Pack | 48V, 350Ah LFP battery (or equivalent, 16 kWh) | Stores steady-use, overnight energy | $7,900 |
| Motor/Generator | 10–20 kW, brushless, bi-directional | Charges/discharges flywheel | $3,900 |
| Inverter/Controls | 10–20 kW, wall-mounted, smart controller & panel | Directs AC/DC power, manages system | $4,200 |
| Safety & Enclosure | Steel frame, fire-rated utility room or cabinet | Vibration, fire, and access protection | $1,800 |
| Base System Hardware Price: | $34,900 | ||
Development, Installation, and Permitting Costs
- Professional Installation: Site inspection, system mounting, electrical tie-in, local testing & signoff: $6,000–$9,000 (varies by region/labor market)
- Commissioning & Programming: Grid interface, safety checks, customer onboarding: $1,500–$2,500
- Permitting/Inspection: Municipal/utility approvals: $1,500–$2,500 typical
- Turn-Key Total (all-in): $42,000–$49,000 (hardware + installation + commissioning + permitting)
- All costs ensure proper business margin, R&D recoupment, and sustainable support. No price cuts or hidden absorption.
Floor Plan & Footprint
Isometric 3D Shop Layout: Blue = Flywheel, Gray = Battery, Orange = Inverter/Controls
- Room size: 2.0 × 2.0 m (minimum); allow 60 cm+ access around main units
- Install location: Garage, shed, basement, or dedicated energy room
- Floor: Reinforced slab, supports 2+ tons
Wholesale & Installer Opportunities
Are you a solar contractor, developer, or distributor?- Hardware-only bulk pricing from $26,900/unit on pallet or container orders (6+ units, hardware only, no install included)
- Installer margins: $8,000+ per unit typical (for install, local labor, commissioning, support)
- Training and co-branded marketing available
- Direct factory support and logistics
- Flexible system options: 12kW, 20kW, or 50kWh+ commercial versions
Bill of Materials (BOM) Estimate
| Subsystem | Main Parts | Unit Cost (USD) | Retail Allocated |
|---|---|---|---|
| Flywheel System | Barrel, bearings, vacuum housing, motor/gen, frame, sensors | $10,000 – $13,000 | $14,900 |
| Battery System | LFP pack, BMS, disconnects, safety wiring | $6,000 – $7,000 | $7,900 |
| Power/Controls | Inverter, charger, PLC, user display/panel, wiring | $2,500 – $3,200 | $4,200 |
| Safety/Mounting | Frame, brakes, enclosure, cooling | $1,200 – $1,700 | $1,800 |
| Total BOM | $20,000 – $25,000 | $34,900 |
All pricing reflects true costs for sustainable product support, engineering, and business growth. Full service, development, and install are added per project and quoted for each site.
Frequently Asked Questions
How long does the system last?
- Flywheel: 20+ years (nearly maintenance free, sealed vacuum)
- Battery: 8–15 years (modular, field-replaceable)
- Industrial-rated safety enclosure, automatic monitoring, emergency brakes, BMS, fire-rated room
- Yes! Fully compatible with modern grid-tie, off-grid, or solar setups
Contact & Installation
Get a Hardware Quote, Turn-Key Installation, or Installer Pricing:
ioncoreenergy@gmail.com
Site visits, volume orders, and custom system sizing available worldwide.
All installs quoted after site assessment. Turn-key = hardware + install + commissioning.
ioncoreenergy@gmail.com
Site visits, volume orders, and custom system sizing available worldwide.
All installs quoted after site assessment. Turn-key = hardware + install + commissioning.
